Shortcut Function Reference
The following shortcut functions can be called either via a Shortcut or via the API.
Transitions: Transitions such as Fade, Zoom, Cut etc can be used as Functions in shortcuts or the API
and are in addition to those listed below. The names of these exactly match the transition names in vMix user interface.
|
Name |
Description |
Parameters |
|
General |
|
|
|
ActivatorRefresh |
Refresh all activator device lights and controls |
None |
|
CallManagerShowHide |
|
None |
|
KeyPress |
Value = Key |
Value |
|
SendKeys |
Send keys to active window Value = Keys |
Value |
|
SetDynamicValue1 |
Set Dynamic Value to use when specifying Dynamic1 as a shortcut value. Value = Value |
Value |
|
SetDynamicValue2 |
Set Dynamic Value to use when specifying Dynamic2 as a shortcut value. Value = Value |
Value |
|
SetDynamicValue3 |
Set Dynamic Value to use when specifying Dynamic3 as a shortcut value. Value = Value |
Value |
|
SetDynamicValue4 |
Set Dynamic Value to use when specifying Dynamic4 as a shortcut value. Value = Value |
Value |
|
Undo |
Undo closing Input. |
None |
|
Audio |
|
|
|
Audio |
Toggle Audio Mute On/Off |
Input |
|
AudioAuto |
|
Input |
|
AudioAutoOff |
|
Input |
|
AudioAutoOn |
|
Input |
|
AudioBus |
M,A,B,C,D,E,F,G Value = Bus |
Value,Input |
|
AudioBusOff |
M,A,B,C,D,E,F,G Value = Bus |
Value,Input |
|
AudioBusOn |
M,A,B,C,D,E,F,G Value = Bus |
Value,Input |
|
AudioChannelMatrixApplyPreset |
Apply preset to channel matrix Value = Preset Name |
Value,Input |
|
AudioMixerShowHide |
|
None |
|
AudioOff |
|
Input |
|
AudioOn |
|
Input |
|
AudioPluginOff |
Turn off Audio Plugin, starting from 1 Value = Plugin Number |
Value,Input |
|
AudioPluginOn |
Turn on Audio Plugin, starting from 1 Value = Plugin Number |
Value,Input |
|
AudioPluginOnOff |
Toggle on/off Audio Plugin, starting from 1 Value = Plugin Number |
Value,Input |
|
AudioPluginShow |
Show Audio Plugin Editor, starting from 1 Value = Plugin Number |
Value,Input |
|
BusAAudio |
|
None |
|
BusAAudioOff |
|
None |
|
BusAAudioOn |
|
None |
|
BusAAudioPluginOff |
Turn off Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
BusAAudioPluginOn |
Turn on Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
BusAAudioPluginOnOff |
Toggle on/off Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
BusAAudioPluginShow |
Show Audio Plugin Editor, starting from 1 Value = Plugin Number |
Value |
|
BusBAudio |
|
None |
|
BusBAudioOff |
|
None |
|
BusBAudioOn |
|
None |
|
BusBAudioPluginOff |
Turn off Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
BusBAudioPluginOn |
Turn on Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
BusBAudioPluginOnOff |
Toggle on/off Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
BusBAudioPluginShow |
Show Audio Plugin Editor, starting from 1 Value = Plugin Number |
Value |
|
BusXAudio |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXAudioOff |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXAudioOn |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXAudioPluginOff |
Turn off Audio Plugin, starting from 1 Value = Bus,PluginNumber |
Value |
|
BusXAudioPluginOn |
Turn on Audio Plugin, starting from 1 Value = Bus,PluginNumber |
Value |
|
BusXAudioPluginOnOff |
Toggle on/off Audio Plugin, starting from 1 Value = Bus,PluginNumber |
Value |
|
BusXAudioPluginShow |
Show Audio Plugin Editor, starting from 1 Value = Bus,PluginNumber |
Value |
|
BusXSendToMaster |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXSendToMasterOff |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXSendToMasterOn |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXSolo |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXSoloOff |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
BusXSoloOn |
M,A,B,C,D,E,F,G Value = Bus |
Value |
|
MasterAudio |
|
None |
|
MasterAudioOff |
|
None |
|
MasterAudioOn |
|
None |
|
MasterAudioPluginOff |
Turn off Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
MasterAudioPluginOn |
Turn on Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
MasterAudioPluginOnOff |
Toggle on/off Audio Plugin, starting from 1 Value = Plugin Number |
Value |
|
MasterAudioPluginShow |
Show Audio Plugin Editor, starting from 1 Value = Plugin Number |
Value |
|
SetBalance |
Value = Balance -1-1 |
Value,Input |
|
SetBusAVolume |
Value = Volume 0-100 |
Value |
|
SetBusAVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetBusBVolume |
Value = Volume 0-100 |
Value |
|
SetBusBVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetBusCVolume |
Value = Volume 0-100 |
Value |
|
SetBusCVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetBusDVolume |
Value = Volume 0-100 |
Value |
|
SetBusDVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetBusEVolume |
Value = Volume 0-100 |
Value |
|
SetBusEVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetBusFVolume |
Value = Volume 0-100 |
Value |
|
SetBusFVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetBusGVolume |
Value = Volume 0-100 |
Value |
|
SetBusGVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetGain |
Value = Gain dB 0-24 |
Value,Input |
|
SetGainChannel1 |
Value = Gain dB 0-24 |
Value,Input |
|
SetGainChannel2 |
Value = Gain dB 0-24 |
Value,Input |
|
SetHeadphonesVolume |
Value = Volume 0-100 |
Value |
|
SetMasterVolume |
Value = Volume 0-100 |
Value |
|
SetMasterVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value |
|
SetVolume |
Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixer |
Set Volume of an Input's Bus Mixer (M,A,B,C,D,E,F,G) Value = Bus,Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerA |
Set Volume of an Input's A Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerB |
Set Volume of an Input's B Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerC |
Set Volume of an Input's C Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerD |
Set Volume of an Input's D Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerE |
Set Volume of an Input's E Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerF |
Set Volume of an Input's F Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerG |
Set Volume of an Input's G Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeBusMixerM |
Set Volume of an Input's Master Bus Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannel1 |
When using SeparateMono on an Audio Input, this can be used to set channel volumes independently. Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannel2 |
When using SeparateMono on an Audio Input, this can be used to set channel volumes independently. Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer |
Set Volume of an Input's sub channel (1 to 16) Value = Channel,Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer1 |
Set Volume of an Input's sub channel 1 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer10 |
Set Volume of an Input's sub channel 10 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer11 |
Set Volume of an Input's sub channel 11 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer12 |
Set Volume of an Input's sub channel 12 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer13 |
Set Volume of an Input's sub channel 13 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer14 |
Set Volume of an Input's sub channel 14 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer15 |
Set Volume of an Input's sub channel 15 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer16 |
Set Volume of an Input's sub channel 16 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer2 |
Set Volume of an Input's sub channel 2 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer3 |
Set Volume of an Input's sub channel 3 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer4 |
Set Volume of an Input's sub channel 4 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer5 |
Set Volume of an Input's sub channel 5 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer6 |
Set Volume of an Input's sub channel 6 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer7 |
Set Volume of an Input's sub channel 7 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer8 |
Set Volume of an Input's sub channel 8 Value = Volume 0-100 |
Value,Input |
|
SetVolumeChannelMixer9 |
Set Volume of an Input's sub channel 9 Value = Volume 0-100 |
Value,Input |
|
SetVolumeFade |
Set volume gradually over x milliseconds. Value = Volume 0-100,Milliseconds |
Value,Input |
|
Solo |
|
Input |
|
SoloAllOff |
Turn off Solo for all Inputs and Busses |
None |
|
SoloOff |
|
Input |
|
SoloOn |
|
Input |
|
SoloPFL |
Toggle between AFL or PFL mode for Solo |
Input |
|
SoloPFLOff |
Turn off PFL mode for Solo |
Input |
|
SoloPFLOn |
Turn on PFL mode for Solo |
Input |
|
Transition |
|
|
|
CutDirect |
Cuts the input directly to Output without changing Preview |
Input |
|
FadeToBlack |
Toggle FTB On/Off |
None |
|
QuickPlay |
|
Input |
|
SetFader |
Set Master Fader T-Bar, 255 will cut to Preview Value = Fader 0-255 |
Value |
|
SetStingerGTInput1 |
Assign GT Input as animation source for Stinger 1 |
Input |
|
SetStingerGTInput2 |
Assign GT Input as animation source for Stinger 2 |
Input |
|
SetStingerGTInput3 |
Assign GT Input as animation source for Stinger 3 |
Input |
|
SetStingerGTInput4 |
Assign GT Input as animation source for Stinger 4 |
Input |
|
SetTransitionDuration1 |
Change Transition Duration for Button 1 Value = Duration MS |
Value |
|
SetTransitionDuration2 |
Change Transition Duration for Button 2 Value = Duration MS |
Value |
|
SetTransitionDuration3 |
Change Transition Duration for Button 3 Value = Duration MS |
Value |
|
SetTransitionDuration4 |
Change Transition Duration for Button 4 Value = Duration MS |
Value |
|
SetTransitionEffect1 |
Change Transition for Button 1 Value = Transition |
Value |
|
SetTransitionEffect2 |
Change Transition for Button 2 Value = Transition |
Value |
|
SetTransitionEffect3 |
Change Transition for Button 3 Value = Transition |
Value |
|
SetTransitionEffect4 |
Change Transition for Button 4 Value = Transition |
Value |
|
Stinger1 |
|
Input,Mix |
|
Stinger2 |
|
Input,Mix |
|
Stinger3 |
|
Input,Mix |
|
Stinger4 |
|
Input,Mix |
|
Transition1 |
Clicks one of the four Transition buttons in the main vMix window. |
None |
|
Transition2 |
|
None |
|
Transition3 |
|
None |
|
Transition4 |
|
None |
|
Output |
|
|
|
Fullscreen |
Toggles Fullscreen On or Off |
None |
|
FullscreenOff |
|
None |
|
FullscreenOn |
|
None |
|
SetOutput2 |
Change what is displayed on Output 2. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input |
Value,Input,Mix |
|
SetOutput3 |
Change what is displayed on Output 3. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input |
Value,Input,Mix |
|
SetOutput4 |
Change what is displayed on Output 4. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input |
Value,Input,Mix |
|
SetOutputExternal2 |
Change what is displayed on the External2 output. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input |
Value,Input,Mix |
|
SetOutputFullscreen |
Change what is displayed on the Fullscreen output. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input |
Value,Input,Mix |
|
SetOutputFullscreen2 |
Change what is displayed on the Fullscreen2 output. Output,Preview,MultiView,Replay,Mix,Input Value = Output, Preview, MultiView, Replay, Mix, Input |
Value,Input,Mix |
|
Snapshot |
Create a snapshot image of the current Output. Optional Value specifies save Filename, otherwise a save file window will appear. Filename can specify date, for example mysnapshot {0:dd MMM yyyy}.jpg Value = Value |
Value |
|
SnapshotInput |
Create a snapshot image of the selected Input. Optional Value specifies save Filename, otherwise a save file window will appear. Filename can specify date, for example mysnapshot {0:dd MMM yyyy}.jpg Value = Value |
Value,Input |
|
StartExternal |
|
None |
|
StartMultiCorder |
|
None |
|
StartRecording |
|
None |
|
StartSRTOutput |
Optional output number starting from 0. Leave blank to control Output 1 only. Value = Output |
Value |
|
StartStopExternal |
|
None |
|
StartStopMultiCorder |
|
None |
|
StartStopRecording |
|
None |
|
StartStopSRTOutput |
Optional output number starting from 0. Leave blank to control Output 1 only. Value = Output |
Value |
|
StartStopStreaming |
Optional stream number starting from 0. Leave blank to control all streams. Value = Stream |
Value |
|
StartStreaming |
Optional stream number starting from 0. Leave blank to control all streams. Value = Stream |
Value |
|
StopExternal |
|
None |
|
StopMultiCorder |
|
None |
|
StopRecording |
|
None |
|
StopSRTOutput |
Optional output number starting from 0. Leave blank to control Output 1 only. Value = Output |
Value |
|
StopStreaming |
Optional stream number starting from 0. Leave blank to control all streams. Value = Stream |
Value |
|
StreamingSetKey |
Set Key on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,mystreamkey Value = Stream |
Value |
|
StreamingSetPassword |
Set Password on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,password Value = Stream |
Value |
|
StreamingSetURL |
Set URL on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,rtmp://myurl/ Value = Stream |
Value |
|
StreamingSetUsername |
Set Username on Custom RTMP Stream. Optional stream number starting from 0 at start followed by comma, e.g 0,username Value = Stream |
Value |
|
WriteDurationToRecordingLog |
Write current recording duration to log file with optional tag text Value. Value = Tag Text |
Value |
|
Title |
|
|
|
AdjustCountdown |
Seconds to add or subtract from current Countdown time Value = Seconds |
Value,Input |
|
ChangeCountdown |
Change countdown time according to Value as hh:mm:ss (00:00:00) Value = Time 00:00:00 |
Value,Input |
|
NextTitlePreset |
|
Input |
|
PauseCountdown |
Pause or Resume Countdown or if complete, Start from beginning. |
Input |
|
PauseRender |
Freeze Title Input while making multiple updates |
Input |
|
PreviousTitlePreset |
|
Input |
|
ResumeRender |
Resume Title Input rendering after making multiple updates |
Input |
|
SelectTitlePreset |
Value = Preset Index |
Value,Input |
|
SetColor |
Change Color in Title using HTML #xxxxxxxx format. SelectedIndex or SelectedName can be used to select object. Value = Color |
Value,Input |
|
SetCountdown |
Set countdown duration according to Value as hh:mm:ss (00:00:00) Value = Duration 00:00:00 |
Value,Input |
|
SetImage |
Change Image in Title according to Filename or empty to clear. SelectedIndex or SelectedName can be used to select image. Value = Filename |
Value,Input |
|
SetImageVisible |
Toggle Image Visibility in Title SelectedIndex or SelectedName can be used to select image. |
Input |
|
SetImageVisibleOff |
Hide Image in Title SelectedIndex or SelectedName can be used to select image. |
Input |
|
SetImageVisibleOn |
Show Image in Title SelectedIndex or SelectedName can be used to select image. |
Input |
|
SetText |
Change Text in Title according to Value parameter. SelectedIndex or SelectedName can be used to select Text Field Value = Text |
Value,Input |
|
SetTextColour |
Change Colour of Text in Title in HTML format (#xxxxxx) Value = Colour |
Value,Input |
|
SetTextVisible |
Toggle Text Visibility in Title SelectedIndex or SelectedName can be used to select text field. |
Input |
|
SetTextVisibleOff |
Hide Text in Title SelectedIndex or SelectedName can be used to select text field. |
Input |
|
SetTextVisibleOn |
Show Text in Title SelectedIndex or SelectedName can be used to select text field. |
Input |
|
SetTickerSpeed |
Change Ticker Speed. SelectedIndex or SelectedName can be used to select ticker field. Value = Speed 0-1000 |
Value,Input |
|
StartCountdown |
|
Input |
|
StopCountdown |
Stop and Reset Countdown |
Input |
|
SuspendCountdown |
Pause Countdown Only |
Input |
|
TitleBeginAnimation |
Value = Animation |
Value,Input |
|
Input |
|
|
|
ActiveInput |
Send to Output the selected Input |
Input,Mix |
|
AddInput |
Create a new Input based on information provided in Value. Video|c:\path\to\video.avi Image|c:\path\to\image.jpg Photos|c:\path\to\folder Title|c:\path\to\title.gtzip VideoList|c:\path\to\playlist.m3u Colour|HTMLColor AudioFile|c:\path\to\audio.wav Flash|c:\path\to\flash.swf PowerPoint|c:\path\to\powerpoint.pptx Value = Type|Filename |
Value |
|
AutoPauseOff |
|
Input |
|
AutoPauseOn |
|
Input |
|
AutoPlayFirst |
Toggle automatically playing first item in a List with Transition |
Input |
|
AutoPlayFirstOff |
Turn Off automatically playing first item in a List with Transition |
Input |
|
AutoPlayFirstOn |
Turn On automatically playing first item in a List with Transition |
Input |
|
AutoPlayNext |
Toggle automatically playing next item in a List |
Input |
|
AutoPlayNextOff |
Turn Off automatically playing next item in a List |
Input |
|
AutoPlayNextOn |
Turn On automatically playing next item in a List |
Input |
|
AutoPlayOff |
|
Input |
|
AutoPlayOn |
|
Input |
|
AutoRestartOff |
|
Input |
|
AutoRestartOn |
|
Input |
|
ColourCorrectionAuto |
Basic Auto Colour Correction. |
Input |
|
ColourCorrectionReset |
Reset Colour Correction to Default Values. |
Input |
|
CreateVirtualInput |
Create a new Virtual Input from the specified Input. |
Input |
|
DeinterlaceOff |
|
Input |
|
DeinterlaceOn |
|
Input |
|
Effect1 |
Toggle Effect 1 On/Off |
Input |
|
Effect1Off |
Turn Effect 1 Off |
Input |
|
Effect1On |
Turn Effect 1 On |
Input |
|
Effect2 |
Toggle Effect 2 On/Off |
Input |
|
Effect2Off |
Turn Effect 2 Off |
Input |
|
Effect2On |
Turn Effect 2 On |
Input |
|
Effect3 |
Toggle Effect 3 On/Off |
Input |
|
Effect3Off |
Turn Effect 3 Off |
Input |
|
Effect3On |
Turn Effect 3 On |
Input |
|
Effect4 |
Toggle Effect 4 On/Off |
Input |
|
Effect4Off |
Turn Effect 4 Off |
Input |
|
Effect4On |
Turn Effect 4 On |
Input |
|
InputPreviewHide |
Hides large preview of input |
Input |
|
InputPreviewShow |
Shows large preview of input |
Input |
|
InputPreviewShowHide |
Toggles large preview of input |
Input |
|
LayerOff |
Turn Off Layer For Input At Index (starting from 1) Value = Index |
Value,Input |
|
LayerOn |
Turn On Layer For Input At Index (starting from 1) Value = Index |
Value,Input |
|
LayerOnOff |
Toggle On/Off Layer For Input At Index (starting from 1) Value = Index |
Value,Input |
|
ListAdd |
Add Filename to List Value = Filename |
Value,Input |
|
ListExport |
Export List as M3U to Filename Value = Filename |
Value,Input |
|
ListPlayOut |
|
Input |
|
ListRemove |
Remove from List by Index starting from 1 Value = Index |
Value,Input |
|
ListRemoveAll |
Remove all items from List |
Input |
|
ListShowHide |
|
Input |
|
ListShuffle |
Shuffle (randomize) List |
Input |
|
LivePlayPause |
|
Input |
|
Loop |
Toggle Loop on Input |
Input |
|
LoopOff |
|
Input |
|
LoopOn |
|
Input |
|
MarkIn |
|
Input |
|
MarkOut |
|
Input |
|
MarkReset |
|
Input |
|
MarkResetIn |
|
Input |
|
MarkResetOut |
|
Input |
|
MirrorOff |
|
Input |
|
MirrorOn |
|
Input |
|
MoveInput |
Value = Number |
Value,Input |
|
MoveLayer |
Move Layer in Input according to Value parameter. Example: 1,2 moves Layer1 to Layer2 Value = FromIndex,ToIndex |
Value,Input |
|
NextItem |
Move to next item in List |
Input |
|
NextPicture |
Move to Next Picture for Photo and PowerPoint Inputs |
Input |
|
Pause |
|
Input |
|
Play |
|
Input |
|
PlayPause |
|
Input |
|
PreviewInput |
Send to Preview the selected Input |
Input,Mix |
|
PreviewInputNext |
Send to Preview the next Input |
None |
|
PreviewInputPrevious |
Send to Preview the previous Input |
None |
|
PreviousItem |
Move to previous item in List |
Input |
|
PreviousPicture |
Move to Previous Picture for Photo and PowerPoint Inputs |
Input |
|
RemoveInput |
|
Input |
|
ResetInput |
|
Input |
|
Restart |
Restart selected Input |
Input |
|
SaveVideoDelay |
Save video clip from Video Delay according to Duration in milliseconds |
Input,Duration |
|
SelectCategory |
Change to Category according to Value (All,Red,Green,Orange,Purple,Aqua,Blue,Custom1-16,Search) Value = Category |
Value |
|
SelectIndex |
Photos,List: Selects item in List according to Value starting from number 1 Virtual Set: Zooms to selected preset using the current speed settings Title: Starts Page animation according to Value starting from number 1 Value = Index |
Value,Input |
|
SetAlpha |
Set Input transparency according to Value. 0 is transparent, 255 is opaque Value = Alpha 0-255 |
Value,Input |
|
SetCCGainB |
Change Gain B level of Input. 1=Original Value = Value 0-2 |
Value,Input |
|
SetCCGainG |
Change Gain G level of Input. 1=Original Value = Value 0-2 |
Value,Input |
|
SetCCGainR |
Change Gain R level of Input. 1=Original Value = Value 0-2 |
Value,Input |
|
SetCCGainRGB |
Change Gain RGB level of Input. 1=Original Value = Value 0-2 |
Value,Input |
|
SetCCGainY |
Change Gain Y level of Input. 1=Original Value = Value 0-2 |
Value,Input |
|
SetCCGammaB |
Change Gamma B level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCGammaG |
Change Gamma G level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCGammaR |
Change Gamma R level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCGammaRGB |
Change Gamma RGB level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCGammaY |
Change Gamma Y level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCHue |
Change Hue level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCLiftB |
Change Lift B level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCLiftG |
Change Lift G level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCLiftR |
Change Lift R level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCLiftRGB |
Change Lift RGB level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCLiftY |
Change Lift Y level of Input. 0=Original Value = Value -1-1 |
Value,Input |
|
SetCCSaturation |
Change Saturation level of Input. 0=Original, -1=Greyscale Value = Value -1-1 |
Value,Input |
|
SetCrop |
Change current Crop value of Input. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetCropX1 |
Change current Crop X1 value of Input. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetCropX2 |
Change current Crop X2 value of Input. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetCropY1 |
Change current Crop Y1 value of Input. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetCropY2 |
Change current Crop Y2 value of Input. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetDynamicInput1 |
Set Dynamic Input from Input Name or Number Value = Input |
Value |
|
SetDynamicInput2 |
Set Dynamic Input from Input Name or Number Value = Input |
Value |
|
SetDynamicInput3 |
Set Dynamic Input from Input Name or Number Value = Input |
Value |
|
SetDynamicInput4 |
Set Dynamic Input from Input Name or Number Value = Input |
Value |
|
SetEffect1Strength |
Set Input 1 Effect Strength Value = Value 0-1 |
Value,Input |
|
SetEffect2Strength |
Set Input 2 Effect Strength Value = Value 0-1 |
Value,Input |
|
SetEffect3Strength |
Set Input 3 Effect Strength Value = Value 0-1 |
Value,Input |
|
SetEffect4Strength |
Set Input 4 Effect Strength Value = Value 0-1 |
Value,Input |
|
SetFrameDelay |
Set the delay in frames Value = Frames |
Value,Input |
|
SetInputName |
Set the Display Name of the Input Value = Name |
Value,Input |
|
SetLayer |
Change Layer in Input according to Value parameter. Example: 1,2 changes Layer1 to Input2 Value = Index,Input |
Value,Input |
|
SetLayer10Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer10CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer10CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer10CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer10CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer10Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer10PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer10PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer10Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer10Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer10X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer10Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer10Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer1Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer1CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer1CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer1CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer1CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer1Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer1PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer1PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer1Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer1Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer1X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer1Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer1Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer2Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer2CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer2CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer2CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer2CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer2Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer2PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer2PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer2Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer2Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer2X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer2Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer2Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer3Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer3CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer3CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer3CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer3CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer3Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer3PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer3PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer3Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer3Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer3X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer3Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer3Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer4Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer4CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer4CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer4CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer4CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer4Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer4PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer4PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer4Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer4Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer4X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer4Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer4Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer5Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer5CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer5CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer5CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer5CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer5Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer5PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer5PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer5Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer5Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer5X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer5Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer5Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer6Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer6CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer6CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer6CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer6CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer6Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer6PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer6PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer6Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer6Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer6X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer6Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer6Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer7Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer7CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer7CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer7CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer7CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer7Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer7PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer7PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer7Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer7Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer7X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer7Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer7Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer8Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer8CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer8CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer8CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer8CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer8Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer8PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer8PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer8Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer8Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer8X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer8Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer8Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayer9Crop |
Change current Crop value of Input Layer. X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayer9CropX1 |
Change current Crop X1 value of Input Layer. 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayer9CropX2 |
Change current Crop X2 value of Input Layer. 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayer9CropY1 |
Change current Crop Y1 value of Input Layer. 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayer9CropY2 |
Change current Crop Y2 value of Input Layer. 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayer9Height |
Change current Height value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer9PanX |
Change current PanX value of Input Layer. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayer9PanY |
Change current PanY value of Input Layer. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayer9Rectangle |
Change current Rectangle values of Input Layer in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayer9Width |
Change current Width value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer9X |
Change current X value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer9Y |
Change current Y value of Input Layer. In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayer9Zoom |
Change current Zoom level of Input Layer. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetLayerAnimated |
Change Layer Index to Input. Animate if input exists in another layer. Example: 1,2,1000 changes Layer1 to Input2. Value = Index,Input,DurationMilliseconds |
Value,Input |
|
SetLayerDynamicCrop |
Change current Crop value of Input Layer from DynamicValue1 (1-10). X1,Y1,X2,Y2 (values between 0 and 1) Value = X1,Y1,X2,Y2 |
Value,Input |
|
SetLayerDynamicCropX1 |
Change current Crop X1 value of Input Layer from DynamicValue1 (1-10). 0=No Crop, 1=Full Crop Value = X1 0-1 |
Value,Input |
|
SetLayerDynamicCropX2 |
Change current Crop X2 value of Input Layer from DynamicValue1 (1-10). 1=No Crop, 0=Full Crop Value = X2 0-1 |
Value,Input |
|
SetLayerDynamicCropY1 |
Change current Crop Y1 value of Input Layer from DynamicValue1 (1-10). 0=No Crop, 1=Full Crop Value = Y1 0-1 |
Value,Input |
|
SetLayerDynamicCropY2 |
Change current Crop Y2 value of Input Layer from DynamicValue1 (1-10). 1=No Crop, 0=Full Crop Value = Y2 0-1 |
Value,Input |
|
SetLayerDynamicHeight |
Change current Height value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayerDynamicPanX |
Change current PanX value of Input Layer from DynamicValue1 (1-10). 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetLayerDynamicPanY |
Change current PanY value of Input Layer from DynamicValue1 (1-10). 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetLayerDynamicRectangle |
Change current Rectangle values of Input Layer from DynamicValue1 (1-10) in pixels. X,Y,Width,Height Value = X,Y,Width,Height |
Value,Input |
|
SetLayerDynamicWidth |
Change current Width value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayerDynamicX |
Change current X value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayerDynamicY |
Change current Y value of Input Layer from DynamicValue1 (1-10). In pixels based on preset resolution Value = Pixels -4096-4096 |
Value,Input |
|
SetLayerDynamicZoom |
Change current Zoom level of Input Layer from DynamicValue1 (1-10). 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SetPanX |
Change current PanX value of Input. 0=centered, -2=100% to left, 2=100% to right Value = Pan -2-2 |
Value,Input |
|
SetPanY |
Change current PanY value of Input. 0=centered, -2=100% to bottom, 2=100% to top Value = Pan -2-2 |
Value,Input |
|
SetPictureEffect |
Set transition effect for Photos and PowerPoint Inputs (Fade, Zoom, etc) Value = Transition |
Value,Input |
|
SetPictureEffectDuration |
Set duration of transition effect in Milliseconds Value = Duration MS |
Value,Input |
|
SetPictureTransition |
Set transition time between Photos and PowerPoint slides in Seconds Value = Seconds |
Value,Input |
|
SetPosition |
Set Position of selected Input according to Value in Milliseconds Value = Milliseconds |
Value,Input |
|
SetRate |
Set Playback speed/rate for Videos and Video Delays 0.5=50%,1=100%,2=200% etc Value = Speed 0.1-4 |
Value,Input |
|
SetRateSlowMotion |
Set Slow Motion speed for Instant Replay 0.5=50%,1=100% etc Value = Speed 0-1 |
Value,Input |
|
SetZoom |
Change current Zoom level of Input. 1=100%, 0.5=50%, 2=200% Value = Zoom 0-5 |
Value,Input |
|
SharpenOff |
|
Input |
|
SharpenOn |
|
Input |
|
SwapLayerAnimated |
Animate swapping the Layers in Input according to Value parameter. Example: 1,2,1000 swaps Layer1 and Layer2 over 1000 milliseconds. Value = FromIndex,ToIndex,DurationMilliseconds |
Value,Input |
|
VideoCallAudioSource |
Master,Headphones,BusA,BusB,BusC,BusD,BusE,BusF,BusG Value = Source |
Value,Input |
|
VideoCallConnect |
Value = Name,Password |
Value,Input |
|
VideoCallReconnect |
|
Input |
|
VideoCallVideoSource |
Output1,Output2,Output3,Output4 Value = Source |
Value,Input |
|
VideoDelayStartRecording |
Start Video Delay Recording |
Input,Duration |
|
VideoDelayStartStopRecording |
Toggle Video Delay Recording |
Input,Duration |
|
VideoDelayStopRecording |
Stop Video Delay Recording |
Input,Duration |
|
WaitForCompletion |
Wait for a Video Input to reach the end of playback. |
Input,Duration |
|
ZoomJoinMeeting |
Value = MeetingID,Password |
Value,Input |
|
ZoomMuteSelf |
|
Input |
|
ZoomSelectParticipantByName |
Value = Name |
Value,Input |
|
ZoomUnMuteSelf |
|
Input |
|
Overlay |
|
|
|
MoveMultiViewOverlay |
Move Overlay in Input MultiView according to Value parameter. Example: 1,2 moves Overlay1 to Overlay2 Value = FromIndex,ToIndex |
Value,Input |
|
MultiViewOverlay |
Toggle On/Off MultiView Overlay For Input At Index (starting from 1) Value = Index |
Value,Input |
|
MultiViewOverlayOff |
Turn Off MultiView Overlay For Input At Index (starting from 1) Value = Index |
Value,Input |
|
MultiViewOverlayOn |
Turn On MultiView Overlay For Input At Index (starting from 1) Value = Index |
Value,Input |
|
OverlayInput1 |
Toggle Overlay1 On/Off with selected Input using configured Transition |
Input,Mix |
|
OverlayInput1In |
Transition Out to Overlay1 with selected Input |
Input,Mix |
|
OverlayInput1Last |
Toggle Overlay1 On/Off with last used Input on this channel |
Mix |
|
OverlayInput1Off |
Immediately switch Overlay1 Off (Cut) |
None |
|
OverlayInput1Out |
Transition Out Overlay1 |
None |
|
OverlayInput1Zoom |
Zooms PIP Overlay to fill Fullscreen and vice versa |
None |
|
OverlayInput2 |
|
Input,Mix |
|
OverlayInput2In |
|
Input,Mix |
|
OverlayInput2Last |
Toggle Overlay2 On/Off with last used Input on this channel |
Mix |
|
OverlayInput2Off |
|
None |
|
OverlayInput2Out |
|
None |
|
OverlayInput2Zoom |
|
None |
|
OverlayInput3 |
|
Input,Mix |
|
OverlayInput3In |
|
Input,Mix |
|
OverlayInput3Last |
Toggle Overlay3 On/Off with last used Input on this channel |
Mix |
|
OverlayInput3Off |
|
None |
|
OverlayInput3Out |
|
None |
|
OverlayInput3Zoom |
|
None |
|
OverlayInput4 |
|
Input,Mix |
|
OverlayInput4In |
|
Input,Mix |
|
OverlayInput4Last |
Toggle Overlay4 On/Off with last used Input on this channel |
Mix |
|
OverlayInput4Off |
|
None |
|
OverlayInput4Out |
|
None |
|
OverlayInput4Zoom |
|
None |
|
OverlayInputAllOff |
Immediately switch all Overlays Off |
None |
|
PreviewOverlayInput1 |
Preview Overlay1 using the selected Input |
Input |
|
PreviewOverlayInput2 |
|
Input |
|
PreviewOverlayInput3 |
|
Input |
|
PreviewOverlayInput4 |
|
Input |
|
SetMultiViewOverlay |
Change Layer in Input MultiView according to Value parameter. Example: 1,2 changes Layer 1 to Input2 Value = Index,Input |
Value,Input |
|
PlayList |
|
|
|
NextPlayListEntry |
Move to Next Item in a running PlayList |
None |
|
PreviousPlayListEntry |
Move to Previous Item in a running PlayList |
None |
|
SelectPlayList |
Open PlayList with Name matching Value Value = PlayList |
Value |
|
StartPlayList |
|
None |
|
StopPlayList |
|
None |
|
Scripting |
|
|
|
ScriptStart |
Value = Script Name |
Value |
|
ScriptStartDynamic |
Start a dynamic script using code specified as the Value. Value = Code |
Value |
|
ScriptStop |
Value = Script Name |
Value |
|
ScriptStopAll |
|
None |
|
ScriptStopDynamic |
|
None |
|
Replay |
|
|
|
ReplayACamera1 |
|
None |
|
ReplayACamera2 |
|
None |
|
ReplayACamera3 |
|
None |
|
ReplayACamera4 |
|
None |
|
ReplayACamera5 |
|
None |
|
ReplayACamera6 |
|
None |
|
ReplayACamera7 |
|
None |
|
ReplayACamera8 |
|
None |
|
ReplayBCamera1 |
|
None |
|
ReplayBCamera2 |
|
None |
|
ReplayBCamera3 |
|
None |
|
ReplayBCamera4 |
|
None |
|
ReplayBCamera5 |
|
None |
|
ReplayBCamera6 |
|
None |
|
ReplayBCamera7 |
|
None |
|
ReplayBCamera8 |
|
None |
|
ReplayCamera1 |
|
None |
|
ReplayCamera2 |
|
None |
|
ReplayCamera3 |
|
None |
|
ReplayCamera4 |
|
None |
|
ReplayCamera5 |
|
None |
|
ReplayCamera6 |
|
None |
|
ReplayCamera7 |
|
None |
|
ReplayCamera8 |
|
None |
|
ReplayChangeDirection |
|
Channel |
|
ReplayChangeSpeed |
Value = Speed |
Value,Channel |
|
ReplayCopyLastEvent |
Value = Event List 0-19 |
Value |
|
ReplayCopySelectedEvent |
Value = Event List 0-19 |
Value |
|
ReplayDeleteLastEvent |
|
Channel |
|
ReplayDeleteSelectedEvent |
|
Channel |
|
ReplayDuplicateLastEvent |
|
Channel |
|
ReplayDuplicateSelectedEvent |
|
Channel |
|
ReplayExportLastEvent |
Value = Folder |
Value,Channel |
|
ReplayFastBackward |
1-30x Value = Speed |
Value,Channel |
|
ReplayFastForward |
1-30x Value = Speed |
Value,Channel |
|
ReplayJumpFrames |
Value = Frames |
Value,Channel |
|
ReplayJumpFramesFastOff |
ReplayJumpFrames jumps 1 frame for each value instead of 1 second. |
Channel |
|
ReplayJumpFramesFastOn |
ReplayJumpFrames jumps 1 second for each value instead of 1 frame. |
Channel |
|
ReplayJumpToNow |
|
Channel |
|
ReplayLastEventCameraOff |
Turns off the specified camera angle (1-8) Value = Camera |
Value |
|
ReplayLastEventCameraOn |
Turns on the specified camera angle (1-8) Value = Camera |
Value |
|
ReplayLastEventSingleCameraOn |
Turns on only the specified camera angle (1-8) Value = Camera |
Value |
|
ReplayLive |
|
None |
|
ReplayLiveToggle |
|
None |
|
ReplayMarkCancel |
|
None |
|
ReplayMarkIn |
|
None |
|
ReplayMarkInLive |
|
None |
|
ReplayMarkInOut |
Number of previous seconds to use when creating a new event. Value = Seconds |
Value |
|
ReplayMarkInOutLive |
Number of previous seconds to use when creating a new event. Value = Seconds |
Value |
|
ReplayMarkInOutLiveFuture |
Number of seconds into the future to use when creating a new event. Value = Seconds |
Value |
|
ReplayMarkInOutRecorded |
Number of previous seconds to use when creating a new event. Value = Seconds |
Value |
|
ReplayMarkInRecorded |
|
None |
|
ReplayMarkInRecordedNow |
|
None |
|
ReplayMarkOut |
|
None |
|
ReplayMoveLastEvent |
Value = Event List 0-19 |
Value |
|
ReplayMoveSelectedEvent |
Value = Event List 0-19 |
Value |
|
ReplayMoveSelectedEventDown |
|
None |
|
ReplayMoveSelectedEventUp |
|
None |
|
ReplayMoveSelectedInPoint |
Value = Frames |
Value,Channel |
|
ReplayMoveSelectedOutPoint |
Value = Frames |
Value,Channel |
|
ReplayPause |
|
Channel |
|
ReplayPlay |
|
Channel |
|
ReplayPlayAllEvents |
Play all Events in active list |
Channel |
|
ReplayPlayAllEventsToOutput |
Play all Events in active list |
Channel |
|
ReplayPlayBackward |
|
Channel |
|
ReplayPlayEvent |
Value = Event Number 0-1000 |
Value,Channel |
|
ReplayPlayEventsByID |
Value = List of IDs |
Value,Channel |
|
ReplayPlayEventsByIDToOutput |
Value = List of IDs |
Value,Channel |
|
ReplayPlayEventToOutput |
Value = Event Number 0-1000 |
Value,Channel |
|
ReplayPlayForward |
|
Channel |
|
ReplayPlayLastEvent |
|
Channel |
|
ReplayPlayLastEventToOutput |
|
Channel |
|
ReplayPlayNext |
|
Channel |
|
ReplayPlayPause |
|
Channel |
|
ReplayPlayPrevious |
|
Channel |
|
ReplayPlaySelectedEvent |
|
Channel |
|
ReplayPlaySelectedEventToOutput |
|
Channel |
|
ReplayRecorded |
|
None |
|
ReplayScrollSelectedEvent |
Move back or forward through events list Value = Count -10-10 |
Value |
|
ReplaySelectAllEvents |
Select all events in active channel. |
None |
|
ReplaySelectChannelA |
|
None |
|
ReplaySelectChannelAB |
|
None |
|
ReplaySelectChannelB |
|
None |
|
ReplaySelectedEventCameraOff |
Turns off the specified camera angle (1-8) Value = Camera |
Value |
|
ReplaySelectedEventCameraOn |
Turns on the specified camera angle (1-8) Value = Camera |
Value |
|
ReplaySelectedEventSingleCameraOn |
Turns on only the specified camera angle (1-8) Value = Camera |
Value |
|
ReplaySelectEvents1 |
|
Channel |
|
ReplaySelectEvents10 |
|
Channel |
|
ReplaySelectEvents11 |
|
Channel |
|
ReplaySelectEvents12 |
|
Channel |
|
ReplaySelectEvents13 |
|
Channel |
|
ReplaySelectEvents14 |
|
Channel |
|
ReplaySelectEvents15 |
|
Channel |
|
ReplaySelectEvents16 |
|
Channel |
|
ReplaySelectEvents17 |
|
Channel |
|
ReplaySelectEvents18 |
|
Channel |
|
ReplaySelectEvents19 |
|
Channel |
|
ReplaySelectEvents2 |
|
Channel |
|
ReplaySelectEvents20 |
|
Channel |
|
ReplaySelectEvents3 |
|
Channel |
|
ReplaySelectEvents4 |
|
Channel |
|
ReplaySelectEvents5 |
|
Channel |
|
ReplaySelectEvents6 |
|
Channel |
|
ReplaySelectEvents7 |
|
Channel |
|
ReplaySelectEvents8 |
|
Channel |
|
ReplaySelectEvents9 |
|
Channel |
|
ReplaySelectFirstEvent |
|
Channel |
|
ReplaySelectLastEvent |
|
Channel |
|
ReplaySelectNextEvent |
|
Channel |
|
ReplaySelectPreviousEvent |
|
Channel |
|
ReplaySetAudioSource |
Name as per dropdown box. e.g 'Camera1' Value = AudioSource |
Value |
|
ReplaySetChannelAToBTimecode |
Set A Timecode to B Timecode |
None |
|
ReplaySetChannelBToATimecode |
Set B Timecode to A Timecode |
None |
|
ReplaySetDirectionBackward |
|
Channel |
|
ReplaySetDirectionForward |
|
Channel |
|
ReplaySetLastEventText |
Value = Text |
Value |
|
ReplaySetLastEventTextCamera |
Changes the text of the specified angle (1-4), example: 3,angle3text Value = Camera,Text |
Value |
|
ReplaySetSelectedEventText |
Value = Text |
Value |
|
ReplaySetSelectedEventTextCamera |
Changes the text of the specified angle (1-4), example: 3,angle3text Value = Camera,Text |
Value |
|
ReplaySetSpeed |
See SetRateSlowMotion Value = Speed 0-1 |
Value,Channel |
|
ReplaySetTimecode |
Set position to Timecode in format yyyy-MM-ddTHH:mm:ss.fff Value = Timecode |
Value,Channel |
|
ReplayShowHide |
|
None |
|
ReplayStartRecording |
|
None |
|
ReplayStartStopRecording |
|
None |
|
ReplayStopEvents |
|
Channel |
|
ReplayStopRecording |
|
None |
|
ReplaySwapChannels |
Swap A to B and vice versa, includes angles and playback status. |
None |
|
ReplayToggleLastEventCamera1 |
|
None |
|
ReplayToggleLastEventCamera2 |
|
None |
|
ReplayToggleLastEventCamera3 |
|
None |
|
ReplayToggleLastEventCamera4 |
|
None |
|
ReplayToggleLastEventCamera5 |
|
None |
|
ReplayToggleLastEventCamera6 |
|
None |
|
ReplayToggleLastEventCamera7 |
|
None |
|
ReplayToggleLastEventCamera8 |
|
None |
|
ReplayToggleSelectedEventCamera1 |
|
None |
|
ReplayToggleSelectedEventCamera2 |
|
None |
|
ReplayToggleSelectedEventCamera3 |
|
None |
|
ReplayToggleSelectedEventCamera4 |
|
None |
|
ReplayToggleSelectedEventCamera5 |
|
None |
|
ReplayToggleSelectedEventCamera6 |
|
None |
|
ReplayToggleSelectedEventCamera7 |
|
None |
|
ReplayToggleSelectedEventCamera8 |
|
None |
|
ReplayUpdateSelectedInPoint |
Update In point of Selected Event to current Position. |
Channel |
|
ReplayUpdateSelectedOutPoint |
Update Mark Out point of Selected Event to current Position. |
Channel |
|
ReplayUpdateSelectedSpeed |
Update Selected Event to use Current Speed. |
Channel |
|
ReplayUpdateSelectedSpeedDefault |
Update Selected Event to use Default Speed. |
Channel |
|
NDI |
|
|
|
NDICommand |
Send specified command to NDI source Value = Command |
Value,Input |
|
NDISelectSourceByIndex |
Value = Index 0-100 |
Value,Input |
|
NDISelectSourceByName |
Value = Name |
Value,Input |
|
NDIStartRecording |
|
Input |
|
NDIStopRecording |
|
Input |
|
PTZ |
|
|
|
PTZCreateVirtualInput |
Creates a PTZ Virtual Input with the current Position |
Input |
|
PTZFocusAuto |
|
Input |
|
PTZFocusFar |
Value = Speed 0-1 |
Value,Input |
|
PTZFocusManual |
|
Input |
|
PTZFocusNear |
Value = Speed 0-1 |
Value,Input |
|
PTZFocusStop |
|
Input |
|
PTZHome |
|
Input |
|
PTZMoveDown |
Value = Speed 0-1 |
Value,Input |
|
PTZMoveDownLeft |
Value = Speed 0-1 |
Value,Input |
|
PTZMoveDownRight |
Value = Speed 0-1 |
Value,Input |
|
PTZMoveLeft |
Value = Speed 0-1 |
Value,Input |
|
PTZMoveRight |
Value = Speed 0-1 |
Value,Input |
|
PTZMoveStop |
Stop all PTZ movement |
Input |
|
PTZMoveToVirtualInputPosition |
Moves to the Position of the PTZ Virtual Input without selecting it into Preview |
Input |
|
PTZMoveToVirtualInputPositionByIndex |
Moves to the Position of the PTZ Virtual Input associated with this Input. Index is first Input found starting from 0 Value = Index 0-100 |
Value,Input |
|
PTZMoveUp |
Value = Speed 0-1 |
Value,Input |
|
PTZMoveUpLeft |
Value = Speed 0-1 |
Value,Input |
|
PTZMoveUpRight |
Value = Speed 0-1 |
Value,Input |
|
PTZUpdateVirtualInput |
Updates selected PTZ Virtual Input with current Position |
Input |
|
PTZZoomIn |
Value = Speed 0-1 |
Value,Input |
|
PTZZoomOut |
Value = Speed 0-1 |
Value,Input |
|
PTZZoomStop |
|
Input |
|
Preset |
|
|
|
LastPreset |
Load the last preset. |
None |
|
OpenPreset |
Load preset from the specified Filename. Value = Filename |
Value |
|
SavePreset |
Save preset to the specified Filename. Value = Filename |
Value |
|
DataSources |
|
|
|
DataSourceAutoNextOff |
Name of the Data Source, Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table |
Value |
|
DataSourceAutoNextOn |
Name of the Data Source, Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table |
Value |
|
DataSourceAutoNextOnOff |
Name of the Data Source, Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table |
Value |
|
DataSourceNextRow |
Name of the Data Source and Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table |
Value |
|
DataSourcePause |
Name of Data Source eg 'Excel/CSV' Value = Name |
Value |
|
DataSourcePlay |
Name of Data Source eg 'Excel/CSV' Value = Name |
Value |
|
DataSourcePlayPause |
Name of Data Source eg 'Excel/CSV' Value = Name |
Value |
|
DataSourcePreviousRow |
Name of the Data Source and Table Name (optional) eg 'Excel/CSV,Sheet1' Value = Name,Table |
Value |
|
DataSourceSelectRow |
Name of the Data Source, Table Name (optional) and Row Index starting from 0 eg 'Excel/CSV,Sheet1,5' Value = Name,Table,Index |
Value |
|
Browser |
|
|
|
BrowserBack |
|
Input |
|
BrowserForward |
|
Input |
|
BrowserKeyboardDisabled |
|
Input |
|
BrowserKeyboardEnabled |
|
Input |
|
BrowserMouseDisabled |
|
Input |
|
BrowserMouseEnabled |
|
Input |
|
BrowserNavigate |
URL Value = URL |
Value,Input |
|
BrowserReload |
|
Input |